1 min read
Welcome to SuperAwesome 3D Print Farm
Why we started a print farm, what we sell, and what the blog will cover — from slicer settings to multi-color printing.
newsintro
Blog
Tutorials, slicer settings, and behind-the-scenes from running a 3D print farm.
4 min readHow to Fix 3D Print Bed Adhesion: The Complete 2026 Guide
Bed adhesion is the #1 cause of failed 3D prints. Here's the exact troubleshooting order we run on every printer in our farm — fixes 95% of failures in under 10 minutes.
troubleshootingtutorialfirst-layer
1 min readA Beginner's Guide to 3D Printing STL Files
What an STL is, what a 3MF is, and how to go from a downloaded file to a finished print without burning a roll of filament.
beginnertutorialstl
3 min readHow to Fix 3D Print Stringing in 5 Minutes
Wispy strings between parts of your 3D print? Here's the four-setting fix that works in Bambu Studio, OrcaSlicer, and most other slicers — without rebuilding your entire profile.
troubleshootingtutorialstringing
2 min readHow to Prepare an STL File for a Perfect First Print
Orientation, supports, slicer settings, and a pre-flight checklist we run on every model before we send it to the printer.
tutorialslicersettings
4 min readPLA vs PETG vs ABS: Which Filament Should You Use?
Strength, heat resistance, ease, food safety, and cost — a side-by-side comparison of the three filaments you'll actually print with, from a print farm that uses tens of kilograms a month.
materialsfilamenttutorial
4 min readHow Much Does It Cost to Run a 3D Printer? Real Numbers from Our Farm
Filament, electricity, parts, time. We tracked every dollar across our 14-printer farm for a year. Here's what 3D printing actually costs — and what it earns.
businessoperationsmoney
4 min readWhere to Sell STL Files Online (And Why Your Own Site Wins Long-Term)
Cults3D, MyMiniFactory, MakerWorld, Patreon, Etsy, your own site — a no-fluff comparison of every platform and the cut they take, from a creator who's tried them all.
businesscreatorsmarketplaces
3 min readMulti-Color 3D Printing Without an AMS
You don't need a $300 AMS to print multi-color. Here are four techniques — manual filament swaps, color change at layer, painting, hydro-dipping — with the exact slicer settings.
multi-colortutorialtechniques