Skip to content
SuperAwesome logoSuperAwesome

1 min read

Welcome to SuperAwesome 3D Print Farm

Why we started a print farm, what we sell, and what the blog will cover — from slicer settings to multi-color printing.

By SuperAwesome Team

We run a small Bambu Lab print farm — a fleet of P1S and H2D machines. Every model on this site has been printed dozens of times, with different filaments and settings, before we sell the file.

That matters because most STL marketplaces have a problem: a beautiful render does not tell you whether the model actually prints well. We've all downloaded a "free" STL and burned twelve hours and a spool of filament finding out the supports were a disaster, the tolerances were off, or the slicer profile was completely untested.

What's on the site

  • STL bundles — every bundle includes the .stl, a Bambu Studio .3mf profile (and OrcaSlicer where applicable), a printable PDF guide, and a personal-use license.
  • Free guides — from "your first print" to "tuning ironing for top surfaces."
  • The blog — what we ship each week, lessons we learn, slicer experiments.

What's coming

  • A drop schedule of one new STL bundle per week.
  • A monthly tuning post: "this week we measured X."
  • A members-only print queue feed (eventually).

If you want the next bundle the moment it drops, join the newsletter.